O.Ersel CANYURT

Professor Dr.

Address: Gazi University Engineering Faculty, Mechanical Engineering Dept.
Telephone: (+90) 312 582 3415
Fax:
E-mail: canyurt@gazi.edu.tr
Nationality: Turkish

WORK EXPERIENCE

Dates (from – to)
2018-cont
Name and address of employer
Gazi University, Ankara Turkey
Type of business or sector
Academic, Research and Development, University
Occupation or position held
Prof. Dr. Vice Director of Additive Manufacturing Technologies Application and Research Center
Main activities and responsibilities
Teaching and Research in Mechanical Engineering

Dates (from – to)
2003-2018
Name and address of employer
Pamukkale University, Denizli, Turkey
Type of business or sector
Academic, Research and Development, University
Occupation or position held
Prof. Dr., Editor-in-chief of Pamukkale University Journal of Engineering Sciences
Main activities and responsibilities
Teaching and Research in Mechanical Engineering, MSc and PhD Thesis supervision, Project Coordinator

Dates (from – to)
2001-2003
Name and address of employer
Advance Innovative Technology (AIT), New York, 12180, USA.
Type of business or sector
Research and Development
Occupation or position held
Project Engineer
Main activities and responsibilities
Analyze, Design and Simulate Exterior Ballistic Projectile

Dates (from – to)
2001-2003
Name and address of employer
Advance Innovative Technology (AIT), New York, 12180, USA.
Type of business or sector
Research and Development
Occupation or position held
Project Engineer
Main activities and responsibilities
Analyze, Design and Simulate Exterior Ballistic Projectile

Dates (from – to)
2000-2001
Name and address of employer
Rensselaer Polytechnic Institute (RPI), Troy, New York, 12180, USA
Type of business or sector
Academic - University
Occupation or position held
Research/Teaching Assistant
Main activities and responsibilities
Research and Teaching

Dates (from – to)
1993-2000
Name and address of employer
Pamukkale University, Denizli, Turkey
Type of business or sector
Academic - University
Occupation or position held
Research Assistant
Main activities and responsibilities
Research

EDUCATION AND TRAINING

Dates (from – to)
1997-2002
Name and type of organization providing education and training
Rensselaer Polytechnic Institute (RPI), New York, USA
Principal subjects/occupational
Design, Analysis, Finite Element Analysis, Optimization, Soft Computing Algorithms, Genetic Algorithms, Composite Materials, Destructive Mechanical Testing, Mechanical Engineering
Title of qualification awarded
Ph.D.

Dates (from – to)
1993-1995
Name and type of organization providing education and training
Northeastern University, Massachusetts, USA
Principal subjects/occupational
Design, Analysis, Finite Element Analysis, Modelling Techniques, Mechanical Engineering
Title of qualification awarded
MSc

Dates (from – to)
1998-1992
Name and type of organization providing education and training
Gazi University, Ankara, TURKEY
Principal subjects/occupational
Mechanical Engineering
Title of qualification awarded
BS

PERSONAL SKILLS AND COMPETENCES

MOTHER TONGUE
Turkish

OTHER LANGUAGES
English
Reading skills
Excellent
Writing skills
Excellent
Verbal skills
Excellent

SOCIAL SKILLS AND COMPETENCES
Living and working with other people, in multicultural environments, in positions where communication is important and situations where teamwork is essential (for example culture and sports), etc.
Management position of the Turkish students union at Rensselaer Polytechnic Institute

ORGANIZATIONAL SKILLS AND COMPETENCES
Coordination and administration of people, projects and budgets; at work, in voluntary work (for example culture and sports) and at home, etc.
Prof. Dr. Canyurt has organized and arranged many international Conferences, as a secretary of congress, executive board member for International Materials Symposiums, International Aegean Energy Symposium.

TECHNICAL SKILLS AND COMPETENCES
With computers, specific kinds of equipment, machinery, etc.
Prof. Dr. Canyurt was well experienced Computer Programming, C, Fortran, MATLAB, Solidworks, ANSYS, and operated MTS. He uses computers extensively for design, analysis, simulation, writing codes, communication, presentation etc.

OTHER SKILLS AND COMPETENCES
Competences not mentioned above.

DRIVING LICENSE(S)
B class, International Driving License from Turkey, NY/USA State Driving License

AUTHORED OR CO-AUTHORED ARTICLES

ARTICLES IN PEER REVIEWED JOURNALS A1. Canyurt O.E., Fatigue Strength Estimation of Adhesively Bonded Tubular Joint Using Genetic Algorithm Approach, International Journal of Mechanical Sciences, 46(3), 359-370 (2004).

A2. Dvorak G., Zhang J., Canyurt O.E., Adhesive Tongue and Groove Joints for Thick Composite Laminates, Composites Science and Technology, 61(8), 1123-1142 (2001).

A3. Canyurt O.E., Hajela P., A Cellular Framework for Structural Analysis and Optimization, Computer Methods in Applied Mechanics and Engineering, 194(30-33): 3516-3534 (2005).

A4.Canyurt O.E., Estimation of Welded Joint Strength Using Genetic Algorithm Approach, International Journal of Mechanical Sciences, 47(8), 1249-1261 (2005).

A5. Ozturk H.K., Canyurt O.E., Hepbasli A., Utlu Z., Three Different Genetic Algorithm Approaches to the Estimation of Residential Exergy Input/Output Values, Building and Environment, 39(7), 807-816 (2004).

A6. Ozturk H.K., Canyurt O.E., Hepbasli A., Utlu Z., Residential-Commercial Energy Input Estimation Based on Genetic Algorithm (GA) Approaches, Energy and Building, 36, 175-183 (2004).

A7. Canyurt O.E., Ceylan H., Ozturk H.K., Hepbasli A., Energy Demand Estimation Based on Two-Different Genetic Algorithm Approaches, Energy Sources, 26, 1313-1320 (2004).

A8. Canyurt O.E., Ozturk H. K., Hepbasli A., Utlu Z., Estimating the Turkish Residential-Commercial Energy Output Based on Genetic Algorithm (GA) Approaches, Energy Policy, 33, 1011-1019 (2005).

A9. Ozturk H.K., Canyurt O.E., Hepbasli A., Utlu Z., Electricity Estimation Using Genetic Algorithm Approach: A Case Study of Turkey, Energy, 30, 1003-1012, (2005).

A10. Ozturk H.K., Canyurt O.E., Hepbasli A., Utlu Z., An Application of Genetic Algorithm (GA) Search Techniques to Future Prediction of Total Exergy Input/Output Estimation, Energy Sources Part A - Recovery Utilization and Environmental Effects, 28(8), 715-725 (2006).

A11. Canyurt O.E., Zhang J., Pre-stressed Adhesive Strap Joints for Thick Composite Sandwich Structures, International Journal of Mechanical Sciences, 48(4), 389-399 (2006).

A12. Canyurt O.E., Ozturk H.K., Three Different Applications of Genetic Algorithm (GA) Search Techniques on Oil Demand Estimation, Energy Conversion and Management, 47(18-19), 3138-4148 (2006).

A13. Canyurt O.E., Ozturk H.K., Hepbasli A., Utlu Z., Genetic Algorithm (GA) Approaches for the Transport Energy Demand Estimation: Model Development and Application, Energy Sources Part A - Recovery Utilization and Environmental Effects, 28(15), 1405-1413, (2006).

A14. Canyurt O.E., Ozturk H.K., Hepbasli A., Utlu Z, Modeling and Application of Genetic Algorithm (GA) Approach to Estimating the Future Total Energy Input Values, Energy Sources Part A - Recovery Utilization and Environmental Effects, 29(10), 861-871 (2007).

A15. Canyurt O.E., Hajela P., A SAND Approach Based on Cellular Computation Models for Analysis and Optimization, Engineering Optimization, 39(4), 381-396 (2007).

A16. Karakas Ö., Canyurt O.E., Gulsoz A., Fatigue Strength Estimation of Butt Welded Joints in Magnesium AZ31 Alloy Using the Genetic Algorithm, Materialwissenschaft und Werkstofftechnik, 39(3), 234-240 (2008).

A17. Canyurt O.E., Ozturk H.K., Application of Genetic Algorithm (GA) Technique on Demand Estimation of Fossil Fuels in Turkey, Energy Policy, 36(7), 2562-2569 (2008).

A18. Canyurt O.E., Kim H.R. and Lee K.Y., Estimation of Laser Hybrid Welded Joint Strength by Using Genetic Algorithm Approach, Mechanics of Materials, 40 (10) 825-831 (2008).

A19. Kavaklioglu K., Ceylan H., Ozturk H.K., Canyurt O.E., Modeling and Prediction of Turkey’s Electricity Consumption Using Artificial Neural Networks, Energy Conversion and Management, 50(11), 2719-2727 (2009).

A20 Canyurt O.E., Hajela P., Cellular Genetic Algorithm Technique for the Multicriterion Design Optimization, Structural and Multidisciplinary Optimization, 40(1), 201-214 (2010).

A21. Canyurt O.E., Meran C, Uslu M, Strength Estimation of Adhesively Bonded Tongue and Groove Joint of Thick Composite Sandwich Structures using Genetic Algorithm Approach, International Journal of Adhesion & Adhesives, 30(4), 281-287 (2010).

A22. Meran C., Canyurt O.E. The Effects of Tool Rotation Speed and Traverse Speed on Friction Stir Welding of AISI 304 Austenitic Stainless Steel, International Journal of Materials Research (Zeitschrift fuer Metallkunde), 102 (4), 420-428 (2011).

A23. Canyurt O.E., Meran C, Fatigue Strength Estimation of Adhesively Bonded Tongue and Groove Joint of Thick Woven Composite Sandwich Structures Using Genetic Algorithm Approach, International Journal of Adhesion & Adhesives, 33, 80-88 (2012).

A24. Bilgin M.B., Meran C, Canyurt O.E., Effect of Tool Angle on Friction Stir Weldability of AISI 430, Welding Journal, 92(1), 42-26, (2013).

A25. Meran C., Canyurt O.E. Joint Strength of Friction Stir Welded AISI 304 Austenitic Stainless Steels, International Journal of Materials Research (Zeitschrift fuer Metallkunde), 104(12), 1197-1202, (2013).

A26. Sekercioglu T., Canyurt O.E. Development of the Positive Mean Stress Diagrams Using Genetic Algorithm Approach, Fatigue & Fracture of Engineering Materials & Structures, 37(3), 306-313, (2014).

A27. Bilgin, M.B., Meran, C.,Canyurt, O.E., Optimization of Strength of Friction Stir Welded Joints for AISI 430 Ferritic Stainless Steels by Genetic Algoritm, International Journal of Advanced Manufacturing Technology, 77(9-12), 2221-2233, (2015)

A28. Canyurt O.E., Sekercioglu T., A New Approach for Calculating the Stiffness of Bolted Connections, Proceedings of the Institution of Mechanical Engineers Part L- Journal Of Materials-Design and Applications, 230, 426-435, (2016).

A29. Tuncer C., Canyurt O.E., The Effect of Nanoparticle Additive on the Mechanical Properties of Glass Fiber Composite Materials, Acta Physica Polonica A, 135(4), 752-755, (2019).

A30. Ersan C., Canyurt O.E., The Effect of Pentagonal and Octagonal Joint Design on The Fatigue Strength of Polymer-Matrix Composite Materials, Materials and Technology, 54(1), 143–148, (2020).

ARTICLES IN PEER REVIEWED CONFERENCES AND SYMPOSIUMS (INTERNATIONAL CONFERENCES ONLY) B1.G. Dvorak, J. Zhang and O. Canyurt, Adhesive Joints for Composite Sandwich Structures, Symposium of Mechanics of Sandwich Structures, ASME International, American Society of Mechanical Engineers, Applied Mechanics Division, AMD 245, p169-179, November 5-10, Orlando, Florida, USA, 2000.

B2. Dvorak G., Zhang J. and Canyurt O.E., Pre-Stressed Adhesive Strap Joints for Composite Laminates, Proceedings of the 23rd Annual meeting of the Adhesion Society, Şubat 20-23, Myrtle Beach, South Carolina, USA, p186-188, 2000.

B3. Dvorak G., Zhang J. and Canyurt O.E., Adhesive joints for thick composite laminates, Proceedings of the 23rd Annual meeting of the Adhesion Society, Şubat 20-23, Myrtle Beach, South Carolina, USA, p389-391, 2000.

B4.Canyurt O.E., Hajela P., A Cellular Automata Framework for Parallel Genetic Algorithm Implementation, 5th World Congress on Structural Multidiciplinary Optimization (5th WCSMO), Mayıs 19-23, Lido di Jesolo, Venice, Italy, 2003.

B5. Canyurt O.E., Hajela P., A SAND Approach Based on Cellular Computation Models for Analysis and Optimization, 45th AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics & Materials Conference, Nisan 19-21, Palm Springs, California, USA, 2004.

B6. Canyurt O.E., Hajela P., Cellular Genetic Algorithms for Multicriteria Design Optimization, 6th Word Congress on Structural and Multidisciplinary Optimization (WCSMO6), International Society for Structural and Multidisciplinary Optimization (ISSMO), Rio de Janerio, Brazil, 2005.

B7. Meran C. and Canyurt O.E., and Gençalp A., Influences of Tool Pin Profile and Tool Shoulder Diameter On Properties Of Friction Stir Welded Cuzn30 Plates (Sürtünme Karıştırma Kaynaklı Cuzn30 Pirinç Plakaların Özellikleri Üzerine Takım Omuz Çapı Ve Uç Profilinin Etkileri), Proceedings of 12th International Materials Symposium (IMSP) Ekim 15-17, p1140-1149, Denizli, Turkey, 2008.

B8. Meran C. and Canyurt O.E., Influence of Tool Pressure Force on Friction Stir Weldability of AISI 304 Austenitic Stainless Steel (AISI 304 Ostenitik Paslanmaz Çeliğin Sürtünme Karıştırma Kaynak Yapılabilirliği Üzerine Takım Baskı Kuvvetinin Etkisi), Proceedings of 12th International Materials Symposium (IMSP) Ekim 15-17, p28-37, Denizli, Turkey, 2008.

B9. Canyurt O.E., Meran C. and Uslu M., The Effect Of Design on Adhesive Joints of Thick Composites, Proceedings of 12th International Materials Symposium (IMSP) Ekim 15-17, p1190-1198, Denizli, Turkey, 2008.

B10. Canyurt O.E., Meran C. and Uslu M., Strength Estimation of Adhesively Bonded Tongue and Groove Joint of Thick Composite Materials using Genetic Algorithm Approach, 3rd International Conference on Advanced Computational Engineering and Experimenting, ACE-X 22-23 Haziran, p59-61, Rome, 2009.

B11. Meran C., Canyurt O.E., Evaluation of Microstructure in Friction Stir Welded Austenitic Stainless Steels, 63rd Annual Assembly & International Conference of the International Institute of Welding (AWST), July 11-17, Istanbul, Turkey, p853-857, 2010.

B12. Meran C., Canyurt O.E., AISI 304 Ostenitik Paslanmaz Çeliğin Sürtünme Karıştırma Kaynak Yapılabilirliği Üzerine Takim Açısının Etkisi, Proceedings of 13th International Materials Symposium (IMSP), s56-64, Ekim 13-15, p1190-1198, Denizli, Turkey, 2010.

B13. Meran C., Canyurt O.E., Friction Stir Welding of Austenitic Stainless Steels, 16th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S, Kasım 22-25, p62, Gliwice-Ustron, Poland, 2010.

B14. Canyurt O.E., Dil Oluk Tekniği ile Birleştirilen Tabakalı Kumaş [0/90] Cam Elyaf Kompozit Malzemelerin Yorulma Dayanımı, Proceedings of 16th International Materials Symposium (IMSP), Ekim 12-14, p546-552, Denizli, Turkey, 2016.

B15. Canyurt O.E., Failure Behavior of A SiCf/SiC Composite Tube Under Biaxial Loading, Proceedings of 16th International Materials Symposium (IMSP), Ekim 12-14, p744-748, Denizli, Turkey, 2016.

B16. Tuncer C., Canyurt O.E., Nanoparticle Additive Effect on the Mechanical Properties of GFCM, 8th International Advances in Applied Physics & Materials Science Congress, Nisan 24-30, Fethiye, Muğla, Turkey, 2018.

PROJECTS DIRECTED Project Manager, 2020-2027
Development of Innovative Metal Additive Manufacturing Technologies, Design, Analysis and Test Methods for Aerospace Industry National Funding, The Scientific and Technological Research Council of Turkey (TUBITAK) Funding, 2019C075, Budget: 171.606,00 Euro

Project Manager, 2018-2018
The Effect of Nanoparticles of SiC, NiO, Clay And Carbon Tube Addition on The Mechanical Properties of Layered Carbon Fiber Composite Materials University Project Funding, 2018FEBE019, Budget: 5.000.00 Euro

Project Manager, 2017-2018
The Effect of CaCO3, SiO2 and Graphene Nanoparticle Addition on The Mechanical Properties of Glass Fiber Composite Materials (Nanopartikül Katkısının Tabakalı Cam Elyaf Kompozit Malzemelerin Mekanik Özelliklerine Etkisi) University Project Funding, 2017FEBE065, Budget: 4.000,00 Euro

Project Manager, 2014-2016
The Effect of Geometry on The Fatigue Strength of Thick Fabric Composite Materials with Adhesive Bonding of Tongue and Groove Technique University Project Funding, 2014FBE039, Budget: 10.000,00 Euro

Project Manager, 2011-2012
Investigation of The parameters that effect The Strength of Bonded Joints at woven Fabric Composite Materials (Kalın Kumaş Kompozit Laminelerde Dil Ve Oluk Birleştirme Tekniği ile Yapıştırma ve Dayanımı Etkileyen Parametrelerin İncelenmesi) University Project Funding, 2011FBE041, Budget: 4.000,00 Euro

Project Manager, 2007-2009
Adhesive tongue-and-groove joints for thick composite laminates; the examination of parameters that effect the joint strength and the determination of the optimum design parameters using Genetic Algorithm technique. National Funding TÜBİTAK Project, 106E214, Budget: 105.000,00 Euro

Project Manager, 2006-2007
Energy planning, determination of energy related parameters, analysis and projection using genetic Algorithm Government Planning Organisation (DPT) Project, 2003K120950, Budget: 18.000,00 Euro